How To(s) + Care Instructions

HOW TO APPLY SCREEN PRINT TRANSFERS:

• Pre-Press Garment for 5 seconds to get out any moisture.
• Use a lint roller to remove any lint from the garment.
• Temp: 325-350°F
• Pressure: Heavy
• Time: 7 Seconds
• Peel: Hot

CARING FOR SCREEN PRINT TRANSFERS:

Caring for your heat transfer decorated garment is super simple and if applied and cared for properly, will last the life of the garment! We recommend waiting at least 24 hours after pressing a garment to perform a wash / dry cycle.

• Washing the garment inside out is the best way to prevent premature wear and tear.
• Cold wash only and hang to dry or tumble dry.
• All orders are provided with pressing instructions. 

HOW TO APPLY UV DTF WRAPS:

• Priot to applying the UV DTF Wrap, be sure to wash your glass or other surfaces you’re using with soap and water. Let it completely dry.  (We do not recommend using alcohol.)

• Before removing the transfer backing, using pressure with your finger or a squeegee press the design to reinforce that the entire design transfers to the clear film correctly.

• Peel the transfer off the white backing, starting with the corner. (I like using my weeding pen for an easy separation.)

• Once the transfer is placed, and starting from the center-outwards press the entire deign to get any air bubble out. (We like using our squeegee for this step! Makes it wayy easier!)

• Using your hands, rub over the entire design to ensure that it all adhered correctly.  (Take your time with this! The more the better!)

• Slowly & very carefully peel the clear film off & that’s it! You’re all done! 
  
  

*For video tutorials you can check out our instagram @lifewithmagen

Care & Washing Instructions for UV-DTF: